symbol current: 1.5 a voltage range: 100 - 1000v byv12 - BYV16 low forward voltage drop high current capability and s im ilar s olvents maximum recurrent peak reverse voltage v rrm max imum rms v olta ge v rms 420 560 700 v maximum dc blocking voltage v dc 600 800 1000 v maximum average f orw ard rectif ied current 9.5mm lead length, @t a =75 peak f orw ard surge current 8.3ms single half -sine-w ave superimposed on rated load @t j =125 maximum instantaneous f orw ard voltage @ 1.5 a v f v maximum reverse current @t a =25 at rated dc blocking voltage @t a =100 maximum reverse recovery time (note1) t rr ns typical junction capacitance (note2) c j pf typical thermal resistance (note3) r ja <d operating junction temperature range t j storage temperature range t stg note:1. measured with i f =0.5a, i r =1a, i rr =0.25a. 100 70 100 easily cleaned with freon,alcohol,isopropanol 400 280 a i fsm 3. thermal resistance f rom junction to ambient. a 2. measured at 1.0mhz and applied rev erse v oltage of 4.0v dc. - 55---- +150 - 55---- +150 45 i r 300 60.0 5.0 100.0 1.3 18 400 1.5 a i f(av) the plastic material carries u/l recognition 94v-0 features fast recovery rectifier diodes case:do-15 molded plastic mechanical data terminals: plated leads solderable per mil-std-202, method 208 polarity: cathode band marking: type number weight: 0.4 grams (approx.) mounting position: any maximum ratings and electrical characteristics t a = 25 c unless otherwise specified single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. byv15 BYV16 byv12 byv13 byv14 600 800 1000 v characteristic unit ! ! ! ! ! ! ! ! ! ! ! low leakage a a b c d do-15 dim min max a 25.40 b 5.50 7.62 c 0.686 0.889 d 2.60 3.60 all dimensions in mm 1 of 2 www.sunmate.tw
1 2 4 10 8 20 40 60 80 100 0 t j =125 8.3ms single half sine-wave 10 20 30 40 50 60 70 80 0 . 6 0 . 8 1 . 0 1 . 2 1 . 4 1 . 6 0.01 0.02 0.06 0.04 0.1 0.2 0.4 1.0 2 4 10 100 t j =25 pulse width=300 s 1 . 8 2 . 0 80 0 0 0.2 4020 60 160 120100 140 180 0.8 0.4 0.6 1.0 1.2 1.4 1.6 single phase half wave 60hz resistive or inductive load pulse generator (note2) d.u.t. 1 n.1. 50 n.1. oscilloscope (note 1) (+) 50vdc (approx) (-) 10 n.1. (-) (+) -1.0a -0.25a 0 +0.5a t rr 1cm amperes current,amperes peak forward surge current amperes junction capacitance,pf fi g. 7 --typi cal juncti on capaci tance fi g. 4-- peak forward surge current average forward rectified 2. rise time = 10ns ma x. source impeda nce = 50 fi g. 1 -- reverse recovery ti me characteri sti c and test ci rcui t di agram notes: 1. rise time = 7ns max. input impedance = 1m . 22pf set time base for 50/100 ns /cm fi g. 2 --typi cal forward characteri sti c number of cycles at 60hz reverse voltage,volts instantaneous forward current fi g. 3-- forward derati ng current instantaneous forward voltage,volts ambient temperature, 1 .1 1 . 0 2 4 6 10 40 20 100 60 200 4 10 20 40 1 0 0 .2 .4 2 t j =25 f=1mhz 2 of 2 www.sunmate.tw
|